D400 – Micro Wind Turbines manufactured by Eclectic Energy Ltd

D400/ D400 LITE AIR HUB ASSEMBLY C/W ALUMINIUM LOCK RING

admin — Mon, 25 Jun 2018 14:53:42 +0000

The air hub assembly pack comprises a new hub centre, hub plates, and blade lock ring complete with sundry fasteners and fitting instructions. Please feel free to contact us if you require additional advice or guidance.

Source

STANDARD TOWER LINER WITH SCREWS

admin — Sat, 07 Jan 2017 00:29:51 +0000

D400 and D400 Lite are a socket type fit into the chosen mount tower tubing. The fit between the D400/ D400 Lite yaw shaft and the internal diameter of the mount tower is achieved using a tower liner. As standard the tower liner will fit a mount tower tube with a 42 mm bore. Custom […]

Source

24V STATOR

admin — Sat, 07 Jan 2017 00:29:22 +0000

The stator comprises 3 phase AC copper windings encapsulated in a heat conductive structural resin. It is very rare for these parts to suffer damage but if there is a requirement to change voltage, i.e. charge 48V batteries rather than 24V, changing the stator windings is the best technical solution. Each stator variant, 12, 24, […]

Source

12V STATOR

admin — Sat, 07 Jan 2017 00:28:26 +0000

The stator comprises 3 phase AC copper windings encapsulated in a heat conductive structural resin. It is very rare for these parts to suffer damage but if there is a requirement to change voltage, i.e. charge 24V batteries rather than 12V, changing the stator windings is the best technical solution. Each stator variant, 12, 24, […]

Source

24V SWITCH

admin — Sat, 07 Jan 2017 00:27:46 +0000

Brake/ bypass switch 24 V 20 Amp. This switch is a two-way single pole break before make type IP67 rated (splash proof) product. It can be used with 24 V D400 or D400 Lite wind generators as a brake/ stop switch as a convenient way of isolating the wind generator and slowing the air blades […]

Source

12V SWITCH

admin — Sat, 07 Jan 2017 00:26:32 +0000

Brake/ bypass switch 12 V 40 Amp. This switch is a two-way double pole break before make type IP67 rated (splash proof) product. It can be used with 12 V D400 or D400 Lite wind generators as a brake/ stop switch as a convenient way of isolating the wind generator and slowing the air blades […]

Source

D400/ D400 LITE RECTIFIER REPLACEMENT PACK

admin — Sat, 07 Jan 2017 00:24:13 +0000

D400/ D400 Lite features a proprietary mono block bridge rectifier. The rectifier inputs 3 phase AC from the stator windings and outputs a high quality, low ripple DC suitable for battery charging. Please feel free to contact us if you require additional advice or guidance.

Source

D400/ D400 LITE HUB CENTRE & SCREWS (2 hole version)

admin — Sat, 07 Jan 2017 00:23:13 +0000

The D400/D400 Lite hub centre is secured to the alternator main shaft by two transverse opposed M6 cap head bolts. Should these bolts work loose in service wear can occur between the alternator shaft and air rotor hub resulting in noise and vibration from the turbine. A new hub centre restores tolerances and smooth quiet […]

Source

D400 ALUMINIUM HUB CENTRE & SCREW (1hole version)

admin — Sat, 07 Jan 2017 00:21:33 +0000

A limited number of D400 wind generators manufactured in 2003-2004, used a single M6 grub screw to secure the hub centre to the alternator shaft. Later models used a two hole hub centre secured by 2 opposing cap head bolts. Should this screw work loose in service, wear can occur between the alternator shaft and […]

Source

D400/ D400 LITE NOSE CONE SPINNER WHITE

admin — Mon, 05 Sep 2016 22:56:59 +0000

D400/D400 Lite feature a nosecone/ spinner which adds to the aesthetic of the machine and also helps smooth the air flow over the air blades roots and alternator housing. Please feel free to contact us if you require additional advice or guidance.

Source