DuoGen – Micro Wind Turbines manufactured by Eclectic Energy Ltd

Rectifier Replacement Pack 80145

admin — Sat, 07 Jan 2017 00:08:58 +0000

Parts to replace the bridge rectifier in early Duo-Gen and Sail-Gen machines. Kit comprises 2x 35A rectifiers, mounting bolts, heat transfer paste, jumper cables and installation instructions. Please feel free to contact us if you require additional advice or guidance.

Source

DUO-GEN/ SAIL-GEN ‘O’ RING SEAL

admin — Fri, 06 Jan 2017 23:55:04 +0000

We recommend that whenever the alternator backplate on a Duo-Gen/ Sail-Gen is removed, a new ‘O’ ring seal is fitted to ensure the housing remains watertight. The pack includes new fibre sealing washers for the three back plate screws. Please feel free to contact us if you require additional advice or guidance.

Source

CONICAL CONNECTOR 16MM (white shaft)

admin — Fri, 06 Jan 2017 23:53:21 +0000

The conical shaft connector is machined from glass filled acetal and it’s used with early versions of both the Duo-Gen and Sail-Gen products. Note, these early machines are characterized by a white 16mm diameter GRP inner drive shaft. The connector links the air rotor or water impeller to the alternator. By design the conical connector […]

Source

CONICAL CONNECTOR 15MM (black shaft)

admin — Fri, 06 Jan 2017 23:51:07 +0000

The conical shaft connector is machined from glass filled acetal and it’s used with later or upgraded versions of both the Duo-Gen and Sail-Gen products. These generators are characterized by a black 15mm diameter carbon fibre inner drive shaft. The connector links the air rotor or water impeller to the alternator. By design the conical […]

Source

ZINC GEAR REPLACEMENT PACK

admin — Fri, 06 Jan 2017 23:49:31 +0000

Duo-Gen’s air drive uses a bevel gear set to translate the rotation of the air blades through 90° to the drive shaft. The gear set comprises one metal and one plastic gear. This combination is used because it runs quietly. If wear is evident on the gear teeth the part should be replaced. Each gear […]

Source

ACETAL GEAR REPLACEMENT PACK

admin — Fri, 06 Jan 2017 23:47:35 +0000

Duo-Gen’s air drive uses a bevel gear set to translate the rotation of the air blades through 90° to the drive shaft. The gear set comprises one metal and one plastic gear. This combination is used because it runs quietly. Note that the plastic gear will wear more quickly than the metal gear so very […]

Source

DUO-GEN/ SAIL GEN ALTERNATOR BEARING & SEAL PACK

admin — Fri, 06 Jan 2017 23:45:59 +0000

Eclectic Energy only use high quality bearing in their products. They are specified to deliver a long trouble-free service life. Duo-Gen/ Sail-Gen water generators use rubber shielded bearings. Bearing life is expected to be a minimum of 10 years, unless the unit suffers from water ingress and corrosion of the main shaft bearing. Should the […]

Source

DuoGen 3 Ex-Long – Water and Wind Generator

admin — Fri, 06 Jan 2017 21:45:03 +0000

[av_button label='If you would like to buy this product please contact us first by clicking here' link='page,76' link_target='' size='x-large' position='left' icon_select='yes' icon='ue859' font='entypo-fontello' color='theme-color' custom_bg='#444444' custom_font='#ffffff' av_uid='av-2rwckv']

Source

DuoGen 3 Long – Water and Wind Generator

admin — Fri, 06 Jan 2017 21:24:02 +0000

Source

DuoGen 3 Short – Water and Wind Generator

admin — Mon, 21 Nov 2016 20:46:05 +0000

Source