Stealth Gen Parts – Micro Wind Turbines manufactured by Eclectic Energy Ltd

TEF-GEL 454G TUB

EclecticEnergy — Wed, 11 Jun 2025 13:52:49 +0000

Tef-Gel is designed to perform in areas of Rust Prevention, Corrosion Elimination and as an Anti Seize Lubricant. Tef-Gel was developed using aerospace industry experience; it will eliminate BLISTERING, CORROSION, RUST, GALLING and SEIZING of hardware in corrosive environments. It can be used in all weather conditions! The amazing composition is derived from a specially […]

Source

D400/ D400 LITE ALUMINIUM BLADE LOCK RING

EclecticEnergy — Wed, 11 Jun 2025 08:27:53 +0000

The blade lock ring is designed to fit within a moulded annular groove in the rear of the air blade roots. As the hub plates are tightened, the ring is drawn into the blade root accurately locating and locking the five blades together. The air rotor should not be operated without the lock ring in […]

Source

AIR BLADE

admin — Mon, 02 Jul 2018 11:09:56 +0000

Source

STANDARD TOWER LINER WITH SCREWS

admin — Sat, 07 Jan 2017 00:29:51 +0000

D400 and D400 Lite are a socket type fit into the chosen mount tower tubing. The fit between the D400/ D400 Lite yaw shaft and the internal diameter of the mount tower is achieved using a tower liner. As standard the tower liner will fit a mount tower tube with a 42 mm bore. Custom […]

Source

24V STATOR

admin — Sat, 07 Jan 2017 00:29:22 +0000

The stator comprises 3 phase AC copper windings encapsulated in a heat conductive structural resin. It is very rare for these parts to suffer damage but if there is a requirement to change voltage, i.e. charge 48V batteries rather than 24V, changing the stator windings is the best technical solution. Each stator variant, 12, 24, […]

Source

12V STATOR

admin — Sat, 07 Jan 2017 00:28:26 +0000

The stator comprises 3 phase AC copper windings encapsulated in a heat conductive structural resin. It is very rare for these parts to suffer damage but if there is a requirement to change voltage, i.e. charge 24V batteries rather than 12V, changing the stator windings is the best technical solution. Each stator variant, 12, 24, […]

Source

24V SWITCH

admin — Sat, 07 Jan 2017 00:27:46 +0000

Brake/ bypass switch 24 V 20 Amp. This switch is a two-way single pole break before make type IP67 rated (splash proof) product. It can be used with 24 V D400 or D400 Lite wind generators as a brake/ stop switch as a convenient way of isolating the wind generator and slowing the air blades […]

Source

12V SWITCH

admin — Sat, 07 Jan 2017 00:26:32 +0000

Brake/ bypass switch 12 V 40 Amp. This switch is a two-way double pole break before make type IP67 rated (splash proof) product. It can be used with 12 V D400 or D400 Lite wind generators as a brake/ stop switch as a convenient way of isolating the wind generator and slowing the air blades […]

Source

REGULATOR 24V (includes dump load)

admin — Sat, 07 Jan 2017 00:18:34 +0000

6TB24 is a solid-state dump type battery charge regulator, featuring fully encapsulated moisture proof electronics. Its function is to prevent possible battery damage by terminating the charge once the batteries are full and also to provide a passive load to prevent the turbine over speeding once it is no longer charging the battery. The 6TB24 […]

Source

REGULATOR 12V (includes dump load)

admin — Sat, 07 Jan 2017 00:16:41 +0000

6TB12 is a solid-state dump type battery charge regulator, featuring fully encapsulated moisture proof electronics. Its function is to prevent possible battery damage by terminating the charge once the batteries are full and also to provide a passive load to prevent the turbine over speeding once it is no longer charging the battery. The 6TB12 […]

Source